3 is for the number of attractions
70002100is the ID assigned to each attraction
(Sea World) is the attraction name for the corresponding
attraction
| is the separator in English input method
, is the comma in English input method
“travelpos” source file (this file only need when the audio guide
system uses GPS trigger )
3|104.062136,30.543444,100,70002100;104.064342,30.54461
2,100,70002101;104.068287,30.552838,100,70002102;
3 is for the number of attractions
104.062136 is the longitude of the attraction (East longitude is
positive number, west longitude is negative number. The
positive signs can be omitted)
30.543444 is the latitude of the attraction (North latitude is
positive, south latitude is negative. The positive signs can be
omitted.)
300 is stand for the trigger radius from the attraction, the unit is
“m”
70002100is the ID assigned to each attraction
| is the separator in English input method
, is the comma in English input method
; is the semicolon in English input method
These files can be edited with Notepad, and then saved in
ANSI format.
The main TRAVEL folder and other mentioned subfolders
above must be created and assigned the corresponding files
(Language folders can be created as needed). Otherwise,
when the visitors select the language on the audio guide
systen, the device will not play properly attractions audio and
not display the correct attraction name.
RFID tag writer Operation
The tag writer need to connect with the PC through the USB
cable while using
