Instructions
1
.
Before Using
2.Paring Operation (F1)
On the charging mode
3.Call Pager
Please charge the pagers for
more than 10 minutes before
The charging indicator flashes quickly during
charging and stays on when fully charged
Press [Set] key to enter setting mode,
the F1 is shown on display.
Press [Call] key to enter the paring mode, the
charging indicators on pagers will turn off, and other
indicators will turn on. 000 shows on the display
Remove a pager from the charging
slot, and enter a desired number
(1-998) through the keyboard within 10s
Press [Call] key to confirm, the pager beeps,
paring is done
Note:
1) Repeat above steps (3 and 4)
to pair other pagers
2) Press[Back] key twice to
exit the setting mode
Enter the desired number, then
press [Call] key to confirm
the corresponding pager will beep,
vibrate and flash.
02
03
