When the alarm is activated, [ ] appears on
the display, the radio will sound the alarm with the
selected mode when reaching the preset time.
If the selected mode is [Ring Embedded], you can
press any button to turn off the ringtone when the
alarm goes off.
RESET
Select [Restore factory settings] in System
Settings, press <MENU> and notice [Restore
factory sett, NO] shows on the display. Press
< > or < > to make [NO] or [YES] shows
alternately. Select [YES] and press <MENU> to
confirm reset.
- ESC
23
24
CONTRAST SET
Select [Contrast] in System Settings, press
<MENU> to enter. Press < > or < > to
adjust from 00-16, press <MENU> to confirm
and exit.
+/
/
-
FIRMWARE VERSION
Select [Firmware version] in System Settings,
press <MENU> to display the firmware version
information.
CONTRAST SET
+/
/
-
The radio supports firmware upgrades, if there is
updated firmware or the radio system breaks
down, you can update the radio using the steps
below:
(Remove the battery before updating)
1. Download the upgraded firmware and update
tool from our website to a computer.
2. Use the provided USB cable to connect the
radio to the computer.
3. Open the downloaded update tool, the below
program appears on the screen.
(Picture 1-1)
FIRMWARE UPGRADE
FIRMWARE
UPGRADING
4. Click [Select file] (as the arrow pointed to) and
find the downloaded upgrade firmware in your
computer (Picture 1-2), then import the file to
the tool. Click [Update file] to start updating.
(See picture 1-3)
5. The process bar will turn from red to green
once the update finishes. (Picture 1-4)
