iBreeze CPAP Systems User Manual
Please first check the DC connector could be used normal and not breaking free.
.
7.3 Connecting the Breathing Circuit
To use the system, you need the following accessories in order to assemble the
recommended breathing circuit:
Resvent interface (nasal mask or full face mask) with integrated exhalation port.
Resvent flexible tubing, 1.8 m.
To connect your breathing circuit to the device, please follow the below steps:
tubing
Note:
If you are using a standard tube (not shown) instead of a heated tube, simply
slide the tubing over the air outlet port on the therapy device.
tubing
WARNING:
Do not pull or stretch the tubing, this could result in circuit leaks.
Inspect the tubing for damage or wear. Discard and replace the tubing as necessary.
3. Attach the headgear to the mask if necessary.
WARNING:
If you are using a full face mask (a mask covering both your mouth and your
nose), the mask must be equipped with a safety (entrainment) valve.
If multiple users share the same equipment, use low-resistance and bacteria-
filtered cotton between the equipment and the tube.
Note:
The selected mask, breathing tube shall meet the performance
requirements with good stability. The user should check the mask and tube for
damage before each use.
If necessary, place a bacterial filter in the air outlet of the unit and connect the
tube. The use of bacterial filter cotton may affect the equipment work. However,
the device can remain functional and be treated.
Never place the respiration hose around the neck.
Do not use any small parts to fix the respiration hose in position as they might be
accidentally swallowed.
Do not squash the respiration hose.
