25
Installation
13. Reattach the transparent protection
cover and tighten with the screw
(Marked position) Close the wiring
box cover. Reattach battery over the
two latchets on the rear.
※
Connect/disconnect the wire to connector sequence
1. To remove one of the wires from its
terminal, insert a small screwdriver
into the rectangular hall above the
terminal.
2. Apply slight pressure to the
screwdriver and at the same time
pull out the wire.
CAUTION
Please must do the switch on & off operation at the middle side of SHT31 and
Ex9BP combined. It’s forbidden to do the operation at the left or right edge side
of combined body. Any wrong operation cause the products break off.
