Restoration Hardware VERSAILLES, Instructions Manual

Page: 5 / 8

Page 5 of 8
STEP #2.
TODDLER RAIL ASSEMBLY.
STEP #2.1
Gently lay both Toddler rails on their backs
on a clean and non-abrasive surface.
STEP #2.2
Fasten the Minifix bolt through pre-installed
nuts underneath of Toddler rails. Please
see DETAIL D .
STEP #2.3
Remove the Minifix lock from the Minifix nut,
as in DETAIL E . Insert the Minifix nuts into
the holes on the Lower side rails, then use
a screwdriver to adjust the Minifix nuts to
make sure the hole on it is aligned with the
bore hole on the top of the Lower side rails
as in DETAIL F .
STEP #2.4
Align the Minifix bolt on the Toddler rails
into the Minifix nuts through the bore hole
on the top of the Lower side rails. Re-insert
the Minifix locks to secure the Minifix bolts
to the Minifix nuts, and the Toddler rails will
be fixed to the Lower side rails. See
DETAIL G .
NOTE : DO NOT OVER TIGHTEN
HARDWARE
MINIFIX BOLT = 4 PCS
MINIFIX NUT/ MINIFIX LOCK = 4 SETS
ALLEN WRENCH = 1 PC
L
L
DETAIL D
Minifix Bolt
Minifix Lock
Minifix Nut
DETAIL E DETAIL F
Minifix Nut
DETAIL G
Minifix Lock