Restech Dx-pH Measurement System, Instructions For Use Manual

Page: 13 / 34

13
The program will also ask you to confirm that all the information is correct, and if you are
finished. Click
YES or NO .
After entering the patient data on the memory card, remove it from the card reader and
insert it into the Dx–Recorder™ unit.
Insert Picture of Side of recorder/Proper Insertion
Physician Setup of the Dx–Recorder™
Note : It is important that you replace the batteries in both the transmitter and
recorder prior to beginning each new study.
Replacing the Batteries
It is crucial that the batteries are replaced before each study, as the recorder will not allow a
new study to be started unless new batteries are used.
Dx–Recorder™
Dx–Transmitter™
Insert Pictures of Proper Battery replacement
Setup
Setup allows you to adjust the system time, select the study duration, and set user interface
options.
You will be prompted to either accept or change time and date information. If the time and
date are correct, press any round shaped key to accept. If either is incorrect, you may reset
it using the up/down arrow keys and then pressing any round key to accept.
Next, you will be asked to choose if the pH display is
ON or OFF . If OFF is selected, the
patient’s display will only show the current time and patient name, it will not display the
pH value during the study.
Finally, you will be prompted also to choose if an audible beep is
ON or OFF . If ON is
selected, a beep will sound when an event button is pressed. If ON is selected, no beep will
sound when any event button is pressed.
The system will return to the main menu and apply the new settings once all choices have
been entered.