6
Overwatch Installation
The Overwatch is designed to be mounted in place of a standard 2 ft x 2 ft ceiling
tile. Installation is only to be performed by a qualified electrician. A power switch
turns the unit ON and OFF.
1. Remove the ceiling tile where the Overwatch unit will be placed.
Be mindful not to place by a return duct.
2. Place Overwatch unit into the open ceiling square.
3. Hardwire Overwatch unit into an available power source. This is to be
performed by a licensed professional.
Service and Maintenance
Service should only be performed by a qualified technician. Make sure the power
switch is turned OFF and the unit is unplugged prior to handling.
It is recommended maintenance to vacuum off the vent openings and clean the
under side of the unit if any dust build-up has accumulated.
A face mask should be worn to prevent inhalation of any particles released into the
air during the process. Eye protection may be necessary when cleaning the unit
from below while it is mounted in the ceiling.
1. Open the front door of the Overwatch unit.
2. Remove the Bracket Assembly by
unscrewing the top thumb screw.
3. Remove the 2 additional screws
from the Bracket Assembly.
4. Remove the Cell Assembly from the packaging box.
