Camera:
Positioning The Camera:
1.
Place the wireless camera on the license plate or rear of the vehicle using screws or the 3M
tape to securely fix in place.
2.
Depending on where your camera is positioned; adjust the tilt accordingly to obtain the best
view.
Please Note: The camera has inbuilt infrared LEDs, these will automatically turn on when there is
insufficient light
Wiring The Camera:
1.
Connect the wires of the camera to an 8-30VDC power source of your vehicle.
2.
Ensure you have connected the camera wiring by the correct polarity which is RED (+Positive)
and BLACK (-Negative).
3.
If you are using this device as a reversing camera; connect the camera to the tail/reversing
lights so the camera is automatically switched on once you place your vehicle in reverse.
4.
If you are using this device for observation purposes; connect the camera to a constant power
source such as your interior lights so that the camera will automatically turn on once your
vehicle has started up.
Please Note: Ensure the camera is connected to an 8-30VDC source otherwise it may damage the
camera. If you are unsure how to wire the camera correctly, please consult an auto electrician.
Operation:
Pairing:
The reversing camera is already pre-paired with the monitor by default. If you need to pair the unit
again or need to apply a second camera to the monitor; then please complete the following
procedure:
1.
Press the MENU button to enter the main menu.
