-
7
-
information “ New Password
：
888888” to every preset phone number”.
Note: Only the authorized phone can change the password.
5. Set Alarm by SMS: ON/OFF
Send SMS “SMSON*123456” (Sending SMS to authorized number) or “SMSOFF*123456” (No SMS) to the
tracker, “SMSON” or “SMSOFF” is a command, “123456” is the tracker password, the tracker will send back the
information
“Alarm by SMS : ON” or “Alarm by SMS :OFF”, If the alarm by SMS is ON, then when the alarm is
triggered, the tracker will send SMS to the authorized number to notice the alarm.the default setting is ON.
6. Set APN & GPRS User name and Password
This tracker can download & configure APN & GPRS username password automatically after power on, if the
APN & GPRS user name password are not right, then you need sending SMS to tracker to change them, if the
tracker can not upload location to platform (Red LED flash twice), please confirm the auto configuration of APN &
GPRS user name password is right, the APN name and GPRS user name & password please call your tracker SIM
card mobile phone company to confirm, the auto configuration APN & GPRS of the tracker please sending SMS
“CHECK*123456” to the tracker to check. if the APN & GPRS are not right, please set by the following description.
Send SMS “APN*123456*apnname” to the tracker, in which, “APN” is the fixed command, “123456” is the
password and “apnname” is the APN name of a mobile phone company. Having successfully been made, there will
be a SMS “APN: apnname”.
Send SMS “USERNAME*123456*username*password” to the tracker, “USERNAME” is a command, “123456”
is the password of the tracker; “username” is the mobile company GPRS user name, “password” is the mobile
company GPRS password, if the operation is success, the tracker will send back the information
“Username:username, Password:password”, if the password is not right, the operation is fault, the tracker will send
back information “Wrong Password”.
7. Enable And Disable Overspeed Alarm (No Platform Necessary)
Send SMS “OVERSPEEDALARMON*123456*SSS” to the tracker number, “OVERSPEEDALARMON” is
command, “123456” is password, “SSS” is the setting alarm speed, unit is km/hour. The tracker will send back the
information “Set Overspeed Alarm On :SSS km/h” .
After enable overspeed alarm, the system will check the speed every 5 minutes. If the speed is higher than the
setting speed, the tracker will send alarm and location information by SMS to the authorized phone number A (only
send to A), The authorized phone will receive max 3 alarm SMS per hour, one hour later it will be active again.
The overspeed alarm SMS is as follow:
Overspeed Alarm
Current Speed:110km/h,Setting:100km/h
Battery:88%
Send SMS “OVERSPEEDALARMOFF*123456” to the tracker number, “OVERSPEEDALARMOFF” is command,
“123456” is tracker password, the tracker will send back the information “Set Overspeed Alarm Off ” .
