-
10
-
“SLEEPON*123456*22*8*9” (Tokyo, time zone is east 9)
“SLEEPON*123456*22*8*-05” (NewYork, time zone is west 5)
But if the command is like this:
“SLEEPON*123456*7*8*9”. It means the unit will sleep from today 7AM to today
8AM, only 1 hour.
“SLEEPON*123456*8*7*9”. It means the unit will sleep from today 8AM to tomorrow 7AM, 23 hours in all.
Set the sleep time can save the power.
Send SMS “SLEEPOFF*123456” to the tracker, “SLEEPOFF” is command, “123456” is password, this
command will disable the SLEEPON command.
16. Check tracker setting
Send SMS “CHECK*123456” to the tracker number, “CHECK” is the fixed command, “123456” is password. The
tracker will send back information including software version, ID S/N number, IP address, authorized phone number,
GPS and GSM signal etc, normally this command is used to test the tracker is working well or not. The following is an
example :
622+,V Sep 08 2014,CC630,CC6221412345678,MODE:1 ,d3.igps.info,58.64.155.133,
8011,300,A:13987654321,B:13876543210,C:13765432101,GSM:-95dBm,CMNET,User,Password,
460,00,255,1,9376,3613,07,88%
622+
:Product model
V Sep 08 2014
:Software version
CC630
:Protocol(CC800/CC828/CC830/CC630 etc)
CC6221412345678
:ID number
MODE:1
:System Working Mode
58.64.155.133,8011 :Server IP & Port
300
:Upload Time Interval
A:13987654321,B:13876543210,C:13765432101 :Authorized Number
GSM:-95dBm
:GSM signal
CMNET
:Current APN
User
:GPRS User Name
Password
:GPRS Password
460,00,255,1,9376,3613,07
:GSM Base Station Information
"MCC,MNC,TA,NUM,LAC, CID,RXLEV ,LAC2,CID2,RXLEV2..."
88%
:Built in Battery Power
17. Re-power On & Reset Tracker
Send SMS “RESET*123456” to the tracker number, “RESET” is a command, “123456” is password. The tracker
will send back information “Reset Tracker and cancel all alarm setting”, then the tracker will power off and then power
on automatically, and this command will not cancel user setting.
18. Back to factory configuration
Send SMS “FACTORY*123456” to the tracker number, “FACTORY” is the fixed command, “123456” is password.
The tracker will send back information “Set factory setting OK”, then the tracker will cancel all the alarm setting in the
