-
8
-
back information “Wrong Password”.
7. Enable And Disable Overspeed Alarm (No Platform Necessary)
Send SMS “OVERSPEEDALARMON*123456*SSS” to the tracker number, “OVERSPEEDALARMON” is
command, “123456” is password, “SSS” is the setting alarm speed, unit is km/hour. The tracker will send back the
information “Set Overspeed Alarm On :SSS km/h” .
After enable overspeed alarm, the system will check the speed every 5 minutes. If the speed is higher than the
setting speed, the tracker will send alarm and location information by SMS to the authorized phone number A (only
send to A), The authorized phone will receive max 3 alarm SMS per hour, one hour later it will be active again.
The overspeed alarm SMS is as follow:
Overspeed Alarm
Current Speed:110km/h,Setting:100km/h
Battery:88%
Send SMS “OVERSPEEDALARMOFF*123456” to the tracker number, “OVERSPEEDALARMOFF” is command,
“123456” is tracker password, the tracker will send back the information “Set Overspeed Alarm Off ” .
Note: In the default, the over speed alarm setting is OFF.
8. In & Out Geo-fence Alarm (5 Geo-Fences Can be Set) set or delete
Total 5 Geo-fences can be set, the geo-fence is a circle and the radius is set by SMS, and the center of the circle
is set by tracker current location or another position ( including longitude and latitude )set by SMS.
Note: After enable the geo-fence alarm, when the unit is moving, it will detect the fence status live.
Default all the geo-fence alarm is OFF.
The command is “SETFENCE*123456*Geo-Name*GGG*22.680307N*114.146843E”
“Geo-Name” is the fence’s name user defined, like school, family or other name, max 8 characters and can be
added up to 5 different fence.
“GGG” is the fence’s radius, from 001 to 999, unit is km.
“22.680307N*114.146843E” is the longitude and latitude of the fence center point . “N” is north, “S” south, and
“E” is east, “W” west.
if no longitude and latitude in the SMS command, like “SETFENCE*123456*Geo-Name*GGG”, the tracker will
turn on the GPS & locate immediately, the tracker will set current location as the fence center point, if the tracker
locate failed, the command will failed.
Going in or going out the fence all can trigger the fence alarm, after the fence alarm is triggered, an alarm SMS
will be sent to the preset phone A, B and C. And the tracker will dial the 3 preset phone one by one to notice the user,
every trigger will only send SMS one time and dial the 3 preset phone one time.
In or Out Geofence (Geo-Name) Alarm
https://maps.google.com/maps?q=22.67680N,114.15188E
Battery:88%
Delete the fence
You can delete any fence by the name, like below:
FENCEOFF*123456*Geo-Name