
-
10
-
“123456” is password, “13987654321” is the number that the tracker need to call back, if no phone number the
tracker will call back to the command sender. After receive the command, the tracker will call the number in the
command or call back the command sender, after the calling is connected, user can hear the sound around the
tracker, but the tracker can not hear anything, it is different with talking, hang up the calling the listen command will
stop.
15. Set Sleep Time
Send SMS “SLEEPON*123456*T1*T2*Timezone”
to the tracker, “SLEEPON” is command, “123456” is
password, “T1” is the local time begin to sleep (24 hours), “T2” is the local time begin to weak up (24 hours),
“Timezone” is the local time zone. The tracker will send back information “Set sleep time (T1-T2), Timezone: Tz”.
After receive the command, the tracker will begin to sleep from time T1, and weak up from time T2. In the sleep time,
the unit will not detect shock signal, and doesn’t upload the location, but can receive SMS and CALL.
For example set sleep from 22PM ( tonight) to 8AM (tomorrow morning), the SMS will be :
“SLEEPON*123456*22*8*+09”
(Tokyo, time zone is east 9)
“SLEEPON*123456*22*8*-05”
(NewYork, time zone is west 5)
But if the command is like this: “SLEEPON*123456*7*8*+09”. It means the unit will sleep from today 7AM to
today 8AM, only 1 hour.
“SLEEPON*123456*8*7*+09”. It means the unit will sleep from today 8AM to tomorrow 7AM, 23 hours in all.
Set the sleep time can save the power.
Send SMS “SLEEPOFF*123456”
to the tracker, “SLEEPOFF” is command, “123456” is password, this
command will disable the SLEEPON command.
16. Check tracker setting
Send SMS “CHECK*123456” to the tracker number, “CHECK” is the fixed command, “123456” is password. The
tracker will send back information including software version, ID S/N number, IP address, authorized phone number,
GPS and GSM signal etc, normally this command is used to test the tracker is working well or not. The following is an
example :
622+,V Sep 08 2014,CC630,CC6221412345678,MODE:1 ,www.999gps.net,58.64.155.133,
8011,300,A:13987654321,B:13876543210,C:13765432101,GSM:-95dBm,CMNET,User,Password,
460,00,255,1,9376,3613,07,88%
622+
:Product model
V Sep 08 2014
:Software version
CC630
:Protocol(CC800/CC828/CC830/CC630 etc)
CC6221412345678 :ID number
MODE:1
:System Working Mode
58.64.155.133,8011 :Server IP & Port
300
:Upload Time Interval
A:13987654321,B:13876543210,C:13765432101 :Authorized Number
GSM:-95dBm
:GSM signal