4-6
B
I
pap p
lus
m s
erIes
u
ser
m
anual
4. Compliance Check Value Screen
This screen displays a number used by your home care provider to
validate that the data from you is the data taken from the Summary
Data Screen. This is a “read-only” screen and you cannot not change
the number on the screen.
5. Summary Data Screen
This screen displays the total therapy hours for the device, the total
blower hours, and the total number of sessions greater than 4 hours
since the device was last reset by the home care provider. This is a
“read-only” screen and you cannot change the numbers on the
screen.
4.4.1.2
v
IeWIng
and
m
odIfyIng
p
atIent
s
etup
s
Creens
Figure 4–7 shows how to navigate the Patient Setup screens.
4.0 cmH2O
1 2 3
Press
+
Press
Press
+
Setup
Bi-Flex Setting
Ramp Start Pres
Mask Alert
Feature: ON
Auto Off
Feature: ON
off 1 2 3
Rise Comfort
f
Igure
4–7 n
avIgatIng
the
p
atIent
s
etup
s
Creens
The Patient Setup screens are described below.
1.
Standby Screen
The Standby screen appears when you first apply power to the
device. You can access the Patient Setup menu from this screen by
pressing the + button. Once inside the Setup menu, press the
or buttons to cycle through the screens.
