Respironics BiPAP AVAPS, User Manual

Page: 22 / 48

User Manual
5.4 C
omPlete
s
etuP
Figure 5–7 shows the completed breathing circuit setup.
Breathing
Circuit
Connection
Circuit
Tubing
Patient Interface
Bacteria
Filter
(Optional)
Exhalation Port
Figure – Complete Breathing Circuit
5.5 P
lugging the
d
eviCe
i
n
You can use AC or DC power to operate the device.
WARNING:
The DC power option is not intended as a battery backup when using AC power.
WARNING:
For proper use, the power supply
must
be placed feet down, in the upright position, as
shown in Figure 5–8.
5.5.1 u
sing
aC P
oWer
Complete the following steps to operate the device using AC power:
1. Plug the pronged end of the AC power supply’s cord into an electrical outlet.
2. The external AC power supply features a cord retainer to provide strain relief for the AC power cord.
Wrap the cord around the AC power supply’s cord retainer, using the wire tie supplied with your
power supply.
WARNING:
Never plug the AC power supply into an outlet that is controlled by a wall switch.
WARNING: Route the wires to avoid tripping.