5
© MFC International
Instructions for Use
Instructions for Use
1.
Lubricate the inside of the hose cuff with a moist cloth and then twist the cuff over
the inlet /outlet collar and then nip up the clamp by hand.
2.
Before connecting the plug to the electricity supply ensure that the toggle switch/s
is/are in the off position.
3.
DO NOT LEAVE unattended when turned on - unplug when not in use.
4.
DO NOT OVER INFLATE as this could cause an explosion!
5.
Disassembly voids warranty without prior consent, with the exception of removal of
the air inlet housing to inspect / clean or replace the filter.
6.
Inspect and clean or replace the foam filter to prevent motors overheating.
7.
To inspect, clean or replace the filter remove the 4 screws securing the inlet housing.
WARNING:
Using the Inflator/Deflator with a blocked filter will overheat the motor
and void the warranty.
