6
Note:
Shelves, door frame, handle and other accessories could be different according to
different models and configuration.
All photos in this manual are for reference. The appliance you buy might not be exactly
the same as shown here.
Please refer to the actual product.
Installing handle and reversing the door
1. Parts for door reversing
①
Door hinge cover
②
Flange screw
③
Door hinge
④
Cap
⑤
Lower door hinge
⑥
Handle screw
⑦
Handle
2. Handle installation
The handle is delivered in a separated package with screws
together inside the carton.
①
Reveal two small holes on the door frame from inner side by
pulling out a bit the door seal
②
Aim the handle to the holes and
insert the screws from inside
③
Screw them up with screw-driver
④
Put back door seal to cover the screws.
3. Reversing the door
Our wine coolers are delivered with the door
opening from left to right. To reverse the
openingdirection:
1) Close the door.
2) Take off the door hinge cover
①
on the up right corner; Unscrew the flange
screws
②
; Take off door hinge
③
; Remove the up
left side cap
④
.
3) Lift the door up until the door gets off the lower
door hinge
⑤
.
4) Unscrew the lower door hinge.
