Fault
Solution
Get rid of the blocking
Replace capacitor
Replace motor
Replace motor
Light damaged
Power cord looses
One way valve and the air
ventilation entrance are not
tightly sealed
Leakage from the connection
of U-shaped section and
cover
The leaf damaged and
causes shaking
The motor is not tightly
hanged
The body is not tightly hanged
The distance between the
body and the gas top too long
Too much ventilation from
open doors or windows
The fixing screw not tight
enough
The hanging screw not tight
enough
16. Problem shooting Cooker hoods
The internal with of motor off or a bad smell
from the motor
Beside the above mentioned, check the following:
Replace lights
Connect the wires as per the electric
diagram
Cause
The leaf blocked
The capacitor damaged
The motor jammed bearing damaged
Light does not
work, motor does
not work
Tighten the hanging screw and make it
horizontal
Tighten the hanging screw and make it
horizontal
English
Users- Installation Instruction Cooker Hoods
Light on, but
motor does not
work
Oil leakage
The machine
inclines
Insufficient
suction
Readjust the distance
Choose a new place and resemble the
machine
Take down the one way valve and seal
with glue
Take U-shaped section down and seal
with soap or paint
Shake of the
body
Replace the leaf
Lock the motor tightly
Fixed the body tightly
GB
fi190821atNEG
11
