Respekta Amadeo WKS171-19, User Manual

Page: 24 / 32

6
Handle installation
Install handle to the doorframe of the appliance.
The handle is delivered in a separated package with screws together
inside the carton.
1. Reveal two small holes on the doorframe from inner side by
pulling out a bit the door seal
2. Aim the handle to the holes and insert the screws from
inside and screw them up with screwdriver.
3. Put back door seal to cover the screws.
Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse the
opening direction:
Open the door at 135 degrees and keep it steady. (be careful that the door is tall &
heavy)
Unscrew the four screws from the lower hinge [Figure 1].
Pull the door outwards slowly [follow the arrowhead direction in Figure 1] to get off
the lower hinge
and continue to pull the door downwards slowly until getting off
from the top right hinge, and unscrew the two screws to take off the lower hinge
plate from the door [Figure 2].
Screw top right hinge off from the cabinet and keep it in the polybag for needs if
you want to change back left opening door in the future.[Figure 3]
Install the top left hinge & the lower hinge to the left side of the cabinet.( is
delivered in a separated polybag inside the packing carton).[Figure 3]