manualshive.com logo in svg

Resources Unlimited Hand Held Edge Deletion Tool, Operation Manual

Share
Download
Resources Unlimited Hand Held Edge Deletion Tool Operation Manual Download Page 11

Hand Held Edge Deletion Tool Manual   ●   Resources Unlimited Company, Inc.   ●   Rev. 2.11   ●   Page 11 

3.  Pull the black restraining washer off the arbor and gently remove the grinding wheel from 

the arbor.  

 

 

4.  Push the new grinding wheel onto the arbor until full seated against the rear restraining 

washer. 

 

5.  Replace the black restraining washer and 9/16” nut while holding the large air tool nut 

with a ¾” wrench or crescent wrench. Stop tightening if the arbor begins to spin in the air 
tool. If the arbor spins too freely, you may need to re-tighten the air tool until the arbor is 
firmly held.  

 

Resources Unlimited keeps a supply of the grinding wheel in stock for the Hand Held Edge 
Deletion Tool. The tool comes equipped with two 3” x ¾” wide x 3/8” arbor Wheel, 8 Density. 
One is mounted on the tool the second is a spare. If you are interested in purchasing wheels 
from us, please check our website at 

www.resourcesunlimitedcompany.com

 for pricing. We can 

also be reached at 734-654-9728. 
 

Summary of Contents for Hand Held Edge Deletion Tool














Reviews:

No comments

Brands by name

Popular brands

Load more brands