Hand Held Edge Deletion Tool Manual ● Resources Unlimited Company, Inc. ● Rev. 2.11 ● Page 10
2. Hold the wire brush perpendicular to the edge of wheel edge as seen in the photo. If the
wheel is at the proper distance from the plastic guard, you should be able to rest the
wooden end of the brush against it and the wire bristles should make contact with the
entire wheel edge.
3. Start the hand tool and pressing the wire brush lightly against the wheel surface until the
glaze on the wheel is completely gone.
4.3 Changing the Edge Deletion Wheel
The Hand Held Edge Deletion tool wheel should be replaced before the diameter of the grinding
wheel is less than the top edge of the UHMW Plastic Guide. To remove the edge deletion wheel:
1. Unplug the Hand Held Edge Deletion tool from the air supply.
2. Holding the large air tool nut behind the guard with a ¾” wrench or a crescent wrench,
use a 9/16” wrench or socket wrench to remove the nut holding the grinding wheel on the
arbor.
