09
SmartStart
Your hearing care professional may have activated the
SmartStart function in your hearing instrument. The Smart-
Start delays the switch-on time 10 seconds after closing
the battery compartment. This is indicated by beeps at one
second intervals after closing the battery compartment.
It allows you to place the instrument behind the ear and
insert the thin tube with xReceiver in the ear without
annoying sounds like squealing.
Putting ReSound Pulse on the ear
1. Hang the instrument over the
top of the ear.
08
User Operated Controls
Volume Control
The volume control in your ReSound Pulse instrument is
fully automatic, so there is no need to bother with adjust-
ments. Your instrument has been programmed to vary its
amplification according to your needs.
On/Off Function
Your ReSound Pulse is equipped with an on/off switch inte-
grated into the battery
compartment.
When the battery
compartment is fully
closed, the instrument
is turned on.
To turn the instrument off,
grasp the battery
compartment door
with your fingernail and gently
pull. The power will switch off at
the point where you can feel a small click. Whenever you
are not wearing the instrument, remember to turn it off to
reduce battery consumption. If you run your ReSound Pulse
with rechargeable batteries the charger opens the battery
compartment door automatically when inserting.
