Quick guide
– GETTING STARTED
GETTING STARTED
(Charge the Micro Mic and pair to aids before use)
1. Turn on the Micro Mic: Push and
hold
the power button
A
on
the top of the Micro Mic until the status light
B
blinks green.
2.
Connect your hearing aids
to the Micro Mic: Push and
hold
the program button/toggle button
on your hearing aids
until
you hear a melody.
Check the connection by blowing or tapping on the Micro Mic.
This sound should be audible in your hearing aids. If this is not
the case, see troubleshooting guide on the reverse page.
3. To exit the Micro Mic streaming program: Push the program
button/toggle button on your hearing aids. Your hearing aids will
return to the most recent hearing aid program indicated by one
or more beeps.
4. Turn off the Micro Mic: Push and
hold
the power button until the
status light turns red and then off.
B
STATUS LIGHT
• Will blink green every other second when
the Micro Mic is turned on and charged.
• Will blink orange every second when there
are less than 30 minutes of battery left.
C
VOLUME CONTROL
Use the volume buttons on the side of the
Micro Mic to adjust the volume. Press ‘+’ to
increase the volume and ‘-’ to decrease the
volume. The mute/volume light
E
will blink
each time the volume is
adjusted.
Mute
Mute/Volume light
USB charger
Volume control
Power button
Status light
A
D
E
C
F
B
F
CHARGING
• Insert the charger in the micro USB plug in
the bottom of the Micro Mic.
• Status light indications when charging:
Power/Charging
Charging
Fully charged
Powered Off
Powered On
D
MUTE
To mute the Micro Mic press the mute button.
Now the mute/volume status light
E
will blink
orange every second. To unmute press the
mute button again, the mute/volume light will
stop blinking.
400669011-US-16.07-Rev.A.indd 1
05-07-2016 11:06:47
