22
23
i
NOTE
: The short press and 1 sec press features are configurable during your fitting session. 5 and
9 second press cannot be changed.
Per default, the push button allows you to use up to four different listening programmes, and three wire-
less accessories programmes.
1. Short press the push button (beep) to switch between programmes.
You will then hear one or more beeps. The number of beeps indicates which programme you have
selected (one beep = programme one, two beeps = programme two, etc.)
2. Press and hold for 1 second (short melody) until streaming begins.
If your hearing aids have been paired with more than one wireless device, pressing for one more
second will switch to the next device.
A short press will end streaming and start the programme you left.
3. Press and hold for 5 seconds to turn your hearing aid ON or OFF.
4. Press and hold for 9 seconds to enter flight mode. For more details, see Flight mode in section
8.3.
When you turn the hearing aids off and then back on, they always return to the default setting
(programme one and preset volume).
Your hearing care professional can configure your push button so that you also can use it to control the
volume as well as switch between listening programmes.
If necessary, your hearing care professional can change the default settings for the push button and fill in
the following table with your new settings:
Push button action
Default setting
New setting
New setting
Short press
Change program
1 sec press
Activates streaming
i
NOTE
: For convenience, you may control your hearing aids from the ReSoundSmart 3D app or the
ReSound Remote Control 2.