Reson SeaBat 7125 SV2, Operator'S Manual

Page: 28 / 212

SYSTEM STARTUP AND SHUTDOWN
SeaBat 7125 SV2 Operator‟s Manual
Page 12 July 25, 2011
Version 3
3 SYSTEM STARTUP AND SHUTDOWN
3.1 Chapter Overview
This chapter includes detailed instructions on the following subjects (click the
emphasized hyperlink to be taken to the section):
System Startup Instructions: Consists of startup details.
Starting the 7k Control Center and Sonar : Consists of a description of the
options available for setting up the sonar system for operation.
System Shutdown Instructions : Consists of details on stopping the system.
Installing a License: Consists of details on installing a license file.
NOTE
For information on configuration of the system (including I/O
module configuration, remote operation, and folder
management), see
section 4 System Configuration .
For information on the user interface and operation of the
system, see
section 5 System Operation.
For information on the practical use of the sonar, see section 6
Active Sonar Usage.
3.2 System Startup Instructions
After the SeaBat hardware has been installed (see Appendix C Installation Instructions ),
the system may be started. To do this, press the power buttons on both the transceiver
and the color monitor.
NOTE
The transceiver power button will be red, when power is connected to the unit; it will
turn blue, when the system is turned on.
The transceiver will power up and boot directly into Windows. No user name or
password is required for standard systems.
NOTE
In the unlikely event that the system is hanging, press the power button on the
transceiver for 10 seconds to shut down the system.