1
Balanced Analog Output, variable - XLR connector
5.5Vrms maximum, 100 Ohm impedance
Connect to preamplifier or directly to amplifier
2
Single-ended Analog Output, variable - RCA connector
2.5Vrms maximum, 100 Ohm impedance
Connect to preamplifier or directly to amplifier
3
Single-ended Analog Output, fixed - DIN connector
2.5Vrms maximum, 100 Ohm impedance
Connect to specially equipped European preamplifier
4
OpusLink connection - DB25 male
Connect only to Opus 21 Power Centre using supplied cable
5
S/PDIF Digital Input - RCA coaxial 75 Ohms
32 - 96 kHz / 16 - 24 bit
Connect to DVD player or other digital source
6
Main Power Switch
When off, power is completely disconnected from the player
7
Fuse - Replace only with time-lag fuse, IEC 60127 Type 3
Rating: 100-120 VAC use 1.6 A
200-240 VAC use 800 mA
8
Mains power
Connect to mains using IEC power cord
9
Voltage Indication - Be certain the Opus 21 has been configured for your
local line voltage. Attempting to operate the Opus 21 at any other voltage
may cause damage not covered by warranty.
10
OpusLink connection - DB25 female
Connect only to Opus 21 Compact Disc Player using supplied cable
