Remote Control
The Opus 21 remote control contains buttons for all of the controls on the front panels, plus the following:
Display
Mute
Repeat
Scan
Input
Pressing and holding these buttons will perform a fast forward or
backward scan during playback. The program will be audible at
a reduced level in play mode, and silent in pause mode.
Pressing this button once enters disc repeat mode. A second press
enters track repeat mode. A third press, or ejecting the disc, exits
repeat mode. Repeat is indicated on the display by the following
symbols:
Disc repeat
Pressing this button selects the external digital input. The display
will indicate the lock status. To return to the cd mode, either press
this button again or press play with a disc loaded.
Pressing this button engages the muting function without affecting
the transport or volume setting. A second press restores the
output to its current volume setting. When mute is on, the volume
level indication flashes.
This button controls the intensity of the display. Upon
power-up, the display begins in its brightest state. Subsequent
presses of this button cycle through four levels:
Bright, Medium, Dim, and Off
In the Off mode, pressing any key will "wake-up" the display
momentarily at medium intensity. If the disc is playing, pressing
play on the remote will wake the display without affecting playback.
0, 1, .. 9
These buttons are used to directly access a cd track. For example,
to go directly to track 25, press 2 followed by 5. For track 2, either
press 0 followed by 2, or press 2 and wait a moment.
r e s o l u t i o n
Display
Input
Mute
Volume
1
2
3
4
5
6
7
8
9
0
Track repeat
