3) Select “Add Device by Serial Number” to enroll.
Once enrolled, remove the battery tab to activate
the sensor. Ensure battery maintains connection.
4) Mount in designated location using
included screws or mounting tape.
5) To test the PIR, arm Helix to “Arm Away” mode
on keypad or smart device. Wait 2.5 mins before
entering the room the PIR is installed in. Walk in
front of PIR. If Helix sounds, disarm. If Helix does not
sound, return to the Dealer Portal to trouble shoot.
Enrolling and Installing Smokes/COs
1) Return to the “Add Device by Serial Number”
heading. Name the zone in which the Smoke
will be installed. For example: Hallway Smoke.
