Installation Guide
CryptiX
™
-Compatible PIR Motion,
TWO 60-Pound-Dog-Immune
Features
•
PYROFLEX™ IR sensor and HighBar™ signal processing for superior performance
•
Unparalleled Pet Immunity and Catch performance
•
44 foot range and 90 degree field of view (45 degrees to each side)
•
Mountable on Flat-wall or in corners
•
Optional External Contact
•
Cover tamper
•
Strong, reliable RF signal
•
6-8 year battery life on CR123A battery
•
Low Battery indication
Enrollment
•
Place panel in enrollment mode.
•
Sensor enrollment signal can be sent by one of the below two ways.
•
Remove the battery tab.
•
Tamper the device by removing the cover.
•
To setup zone and configure the sensor, log into the web based dealer
portal.
Installation
•
Remove the cover of the enclosure by pressing the latch at the top of the
enclosure.
Cover latch
•
Remove the PCB from the bottom of the enclosure.
•
Punch out the mounting holes
•
Motion sensitivity selection
•
Make sure bug foam is installed
•
Mount at 7.5 foot height for optimum performance between: Catch
performance, Pet Immunity and False Alarm prevention.
Mounting holes
PCB latch
Enclosure base
Bug foam
7.5 ft
10 ft
20 ft
30 ft
40 ft
0
56
56
56
40
Default: Normal Sensitivity
Jumper on BOTH PINS
High Sensitivity
Jumper on ONLY 1 PIN
CONNECT
O
2
