RE211_Honeywell-Compat_Micro-DWS_Instructions.doc
Page 1 of 4
9-Apr-12
www.ResolutionProducts.com
RE211 Mighty Mouse™ Honeywell® -Compatible
Micro Door Sensor
Features
•
Smallest Door/Window Sensor & Magnet in the Industry.
•
Full-sized transmit range, AND…
•
4-6 year battery life on CR1632 battery.
•
Invisible external antenna – gives great range and long life
•
Low Battery indication.
Mounting
Antenna Routing Options
Wireless
Security
Solutions
Run a light coat of
permanent paste
glue on the
underside of the
antenna
wipe it down
with finger
Remove
High Bond
tape liners
Align
centering marks
Position Antenna free and clear of sensor;
not inside cover or under sensor.
DON’T MOUNT
ON METAL,
It will severely
reduce transmit
range and
magnetic gap
A. Fasten with paste glue, as above.
B. Or let it lay on surface, nearly invisibly.
D. Drill hole and
thread antenna down
C. Route into trim gaps or
along side of trim
1.
2.
½ inch or less
magnet gap
3.
4.
RE211_Honeywell-Compat_Micro-DWS_Instructions.doc
Page 2 of 4
9-Apr-12
www.ResolutionProducts.com
Enrolling in Panel
.
1.
Pull out the red tab to trip the sensor. This powers the sensor.
2.
Put Honeywell or 2GIG panel in enrollment mode.
Honeywell Panels
2GIG Panels
1. Put panel in RF Zone
Programming mode.
2. Move magnet to and away
(open/close, fault/restore)
from sensor.
3.
Will enroll as Loop 2.
1. Equip Type - Contact
2. Equip Code - 000 (other), or
(0862) Thin door/window
3. Enter RF Serial # -
Press Shift, Press Learn,
4. Trip Zone
5. (verify ID with ID on battery tab)
6. Equip Age - 0 (New)
7. Loop - 2 (Flood)
Internal Picture
Open/Close until
Sensor enrolls in panel
Sensor
sends
enrollment
signal
Battery
Minus side up
Reed Switch
Antenna
Battery
contacts
1.
2.
