RE111_GE-Compat_Micro-DWS_Instructions.docPage 1 of 4
9-Apr-12
www.ResolutionProducts.com
RE111 Mighty Mouse™ GE-Compatible Micro Door Sensor
Features
•
Smallest Door/Window Sensor & Magnet in the Industry.
•
Full-sized transmit range, AND…
•
4-6 year battery life on CR1632 battery.
•
Invisible external antenna – gives great range and long life
•
Low Battery indication.
Mounting
Antenna Routing Options
Wireless
Security
Solutions
Run a light coat of
permanent paste
glue on the
underside of the
antenna
wipe it down
with finger
Remove
High Bond
tape liners
Align
centering marks
Position Antenna free and clear of sensor;
not inside cover or under sensor.
DON’T MOUNT
ON METAL,
It will severely
reduce transmit
range and
magnetic gap
A. Fasten with paste glue, as above.
B. Or let it lay on surface, nearly invisibly.
D. Drill hole and
thread antenna down
C. Route into trim gaps or
along side of trim
1.
2.
½ inch or less
magnet gap
3.
4.
RE111_GE-Compat_Micro-DWS_Instructions.docPage 2 of 4
9-Apr-12
www.ResolutionProducts.com
Enrolling in Panel
.
1.
Put GE panel in enrollment mode.
2.
Pull out the red tab to trip the sensor. This powers the sensor and it sends
a tamper enrollment signal.
3.
The tamper enrollment signal can be re-sent by touching a magnet to the
sensor 5 times within 5 seconds.
Internal Picture
Pull Tab to send
Tamper-Enroll signal
Open/Close 5 times
in 5 seconds
Sensor sends
tamper
enrollment
signal
Battery
Minus side up
Reed Switch
Antenna
Battery
contacts
