Resol WMZ Plus, Installation & Operation Manual

Page: 10 / 24

10
en
3.3 Parameterisation mode
After the installer code is entered (see page 20), the device changes to the pa-
rameterisation mode.
Note
In parameterisation mode, the metering process will stop and the message
Metering stopped – Parameterisation active will be indicated.
The LED in the Lightwheel
® will glow yellow.
1. In order to carry out adjustments in the menu, press the right button (
✓
).
The device changes to the main menu in which adjustments on the installer level
can be made.
2. In order to save the adjustments made, select the menu item Save in the main
menu.
The device will leave the installer level and restart.
3.4 Selecting menu points and adjusting values
During normal operation of the device, the display indicates the main menu.
If no button is pressed for 2 min, the display illumination switches off. After another
2 min, the device changes to the status display.
Î In order to get from the status menu into the main menu, press the left button
(
⟲
)!
Î
Press any key to reactivate the display illumination.
Î In order to scroll through the menu items, turn the Lightwheel
®
.
If the symbol
»
is shown behind a menu item, pressing the right button (
✓
) will
open a new submenu.
Values and options can be changed in different ways:
Numeric values can be adjusted by means of a slide bar. The minimum value is indi-
cated to the left, the maximum value to the right. The large number above the slide
bar indicates the current adjustment. By turning the Lightwheel
® , the upper slide bar
can be moved to the left or to the right.
Only after the adjustment has been confirmed by pressing the right button (
✓
) will
the number below the slide bar indicate the new value. The new value will be saved
if it is confirmed by pressing the right button (
✓
) again.
active area inactive area
When 2 values are locked against each other, they will display a reduced adjustment
range depending on the adjustment of the respective other value.
In this case, the active area of the slide bar is shortened, the inactive area is indicated
as a dotted line. The indication of the minimum and maximum values will adapt to
the reduction.
If only one item of several can be selected, they will be indicated with radio buttons.
When one item has been selected, the radio button in front of it is filled.