background image

Distributed by:

RESOL - Elektronische Regelungen GmbH

Heiskampstraße 10 
45527 Hattingen / Germany
Tel.:  +49 (0) 23 24 / 96 48 - 0 
Fax:  +49 (0) 23 24 / 96 48 - 755
www.resol.com 
[email protected]

Important note

The texts and drawings in this manual are correct to the best of our knowledge.  
As faults can never be excluded, please note:
Your own calculations and plans, under consideration of the current standards and 
directions should only be basis for your projects. We do not offer a guarantee for 
the completeness of the drawings and texts of this manual - they only represent 
some examples. They can only be used at your own risk. No liability is assumed for 
incorrect, incomplete or false information and / or the resulting damages.

Note

The design and the specifications can be changed without notice.
The illustrations may differ from the original product.

Imprint

This mounting- and operation manual including all parts is copyrighted. Another 
use outside the copyright requires the approval of RESOL – Elektronische Rege-
lungen GmbH. This especially applies for copies, translations, micro films and the 
storage into electronic systems.

Editor: RESOL - Elektronische Regelungen GmbH

Summary of Contents for FlowSol C









Reviews: