D e lt a S o l
®
C/3
© RESOL 11150 deltasol_c/3.monen.ind
d
11
|
4.1.1 Collector temperature
COL:
Collector temperature
display range: -40 ... +250 °C
4.1.2 Store temperatures
TST, TSPL, TSPU:
Store temperatures
Display range: -40 ... +250 °C
4.1.3 Sensor 3 and sensor 4
S3, S4:
Temperatures at the sensors
S3 and S4
Display range: -40 ... +250 °C
4.1.4 Other temperatures
TRF:
other mea sured tempe ratures
Display range: -40 ... +250 °C
4.1.5 Operating hours counter
h P / h P1
/
h P2:
Operating hours counter
Display channel
Display of the current collector temperature.
•
COL : collector temperature
Display of the current store temperature.
•
TST : store temperature
•
TSTL : store base temperature,
•
TSTU : store top temperature
Display of the current temperature at the corresponding
additional sensor (without control function).
•
S3
: temperature - sensor 3
•
S4
: temperature - sensor 4
Please note:
Only if the temperature sensors are connected (dis-
played), will S3 and S4 be displayed.
Display of the current temperature at the sensor.
•
TRF : temperature - return
The operating hours counter accumulates the solar opera-
ting hours of the respective relay (
h P /
h P1
/
hP2
). Full
hours are displayed.
The accumulated operating hours can be set back to zero.
As soon as one operating hours channel is selected, the sym-
bol
is displayed. Press the SET (3) button for approx. 2
seconds in order to access the RESET-mode of the counter.
The display symbol
will flash and the operating hours
will be set to 0. Confirm the reset with the
button in
order to finish the reset.
In order to interrupt the RESET-process, do not press a
button for about 5 seconds. The display returns to the
display mode.
4.1.6 Time
In this channel the current time is indicated.
Press button
for 2 seconds, the hours will then be
displayed. Press the button again, the minutes will then be
displayed (flashing). The time can be set using buttons 1 and
2 and saved by pressing the
button.