Resol DeltaSol AX HE Manual Download Page 2

2

en

© 20180705_11206323_DeltaSol_AX_HE.monen_neu.indd

Safety advice

Please pay attention to the following safety advice in order to avoid danger and 
damage to people and property.

Instructions

Attention must be paid to the valid local standards, regulations and directives!

Information about the product
Proper usage

The differential temperature controller is designed for electronically controlling 
solar thermal, heating and air conditioning systems in compliance with the technical 
data specified in this manual.
Improper use excludes all liability claims.
CE Declaration of conformity

The product complies with the relevant directives and is therefore 
labelled with the CE mark. The Declaration of Conformity is available 
upon request, please contact the manufacturer.

Note
Strong electromagnetic fields can impair the function of the device.

 

Î

Make sure the device as well as the system are not exposed to strong 
electromagnetic fields.

Target group

These instructions are exclusively addressed to authorised skilled personnel.
Only qualified electricians should carry out electrical works.
Initial installation must be effected by the system owner or qualified personnel 
named by the system owner.

Description of symbols

WARNING!

Warnings are indicated with a warning triangle!

 

Î

They contain information on how to avoid the danger 
described.

Signal words describe the danger that may occur, when it is not avoided.
•  WARNING means that injury, possibly life-threatening injury, can occur.
•  ATTENTION means that damage to the appliance can occur.

Note
Notes are indicated with an information symbol.

Cross reference
A book symbol indicates a cross reference to another chapter.

 

Î

Arrows indicate instruction steps that should be carried out.

Disposal

•  Dispose of the packaging in an environmentally sound manner.
•  At the end of its working life, the product must not be disposed of as urban waste. 

Old appliances must be disposed of by an authorised body in an environmentally 
sound manner. Upon request we will take back your old appliances bought from 
us and guarantee an environmentally sound disposal of the devices.

Subject to technical change. Errors excepted.

Summary of Contents for DeltaSol AX HE













Reviews: