LabRAM I Installation and User Manual
HMI Operation
–
Modes of Operation
Resodyn Acoustic Mixers
39
Rev. 072420
15. The entry from the previous step is displayed in the
“Timer Entry” dialog. To edit hours and minutes,
simply repeat the previous steps using the other
text boxes. When complete, touch the <OK>
button.
16. The timer value, 30 seconds, in this case, will
appear in the Mix Timer pane in the text boxes
under
“Duration:” and “Remaining:.” Touch the
<Start Mixer> button to begin a mix cycle in Auto
Mode.
17.
The “Enter Mix Comment” screen will appear.
Enter a fitting description of the current mix. The
text entered in this screen is stored in a log file in
the LabRAM I
’s memory. Touch <OK> when
finished.
18. The Main Screen is again displayed and the
LabRAM I will begin accelerating/mixing. The
<Start Mixer> button changes to the <Stop Mixer>
button. Depending on Auto Mode Timer mode
configured, the timer may start immediately, it may
start when the mixer is at acceleration setpoint, or
not at all (manual). The factory default for this
option is manual mode where the user must touch
the <Start/Stop> to start the timer. Touch
<Start/Stop> in the Mix Timer pane.
