LabRAM I Installation and User Manual
HMI Operation
–
Modes of Operation
Resodyn Acoustic Mixers
38
Rev. 072420
9.
The “Auto Mode Configuration and Alarms” screen
is displayed and allows a user to define limits to
setpoint entry or shut the machine down if
exceeded. For example, a material being mixed
may be acceleration sensitive. The Maximum
Acceleration could be limited in this screen. The
Configuration for Auto Mode is selected by
touching the textbox next to “Configuration Name:”
10.
The “Select Configuration” dialog will appear, and
the Configuration can be selected from the list (only
one configuration is defined in the image). Touch
<OK> after the configuration has been selected.
11.
The “Auto Mode Configuration and Alarms” screen
will be displayed again. To close the dialog touch
<Done>.
12. To enter a timer duration, touch the textbox under
“Duration:” in the Mix Timer Pane.
13.
The “Timer Entry” dialog appears. The dialog has
three textboxes, which are, going from left-to-right
hours:minutes:seconds. Touch the right textbox to
enter seconds.
14.
The “Numeric Entry” dialog will popup. Using the
numeric keypad, enter 30 (for 30 seconds). Touch
<Enter> when complete.
