background image

34

Symbols

 Follow instructions for use; 

 Class II equipment; 

 

Type BF applied part; 

 Bell (Remote Alarm); 

IP31

 

Device is protected against solid foreign objects of 2.5 mm 

diameter and greater and vertically falling water drops; 

 Caution; 

 General warning 

sign (see H4i connector plug and AC connection on the device); 

 Standby or preparatory 

state for a part of equipment; 

 Connection for oxygen supply; 

max 30 l/min

 (max 30 L/

min); 

 Data  port; 

 CE labeling in accordance with EC directive 93/42/EEC, class II b; 

 Temperature limitation for storage and transport; 

 Handle with care; 

Maximum 

humidity; 

 Keep dry;  

 Manufacturer; 

 Upside; 

 Catalogue number; 

 Serial number; 

 

Batch code; 

 Do not re-use; 

 Use by date; 

 Keep 

away from sunlight; 

 Do not use if package is damaged; 

 

 Latex-free

Environmental information  

This device must be disposed of in accordance with the laws 

and regulations of the country in which disposal occurs.

The crossed-out wheeled bin symbol 

 indicates that the product bearing this symbol 

may not be disposed of together with general household waste, but instead requires 
separate disposal. This requirement for separate disposal is based on the European 
Directive 2012/19/EU for electrical and electronic equipment, and the European Directive 
2006/66/EC for batteries. You can hand in the product at a municipal collection point, for 
example. This reduces the impact on natural resources and prevents contamination of the 
environment through the release of hazardous substances. 

Batteries containing more than 0.0005 percent of mercury by mass, more than 0.002 
percent of cadmium by mass or more than 0.004 percent of lead by mass are marked 
below the crossed-bin symbol with the chemical symbols (Hg, Cd, Pb) of the metals for 
which the limit is exceeded.

For further information regarding product disposal, please contact your local ResMed office 
or your specialist distributor, or visit our website at www.resmed.com.

Dispose of used air filters and air tubings according to the directives in your country.

- 20 °C

+ 60 °C

- 4 °F

+ 140 °F

LATEX

Summary of Contents for stellar series










































Reviews: