ResMed S8 Compact System, Clinician Manual

Page: 24 / 141

19
N
AVIGATING THE
S8 C
OMPACT
M
ENUS
E
NGL
IS
H
Refer to the S8 Compact Quick Set-up Guide for details of factory settings.
Table 2: Parameters in the Patient and Clinical Menus
Parameter Description
Altitude
Compensation
*
Sets the altitude compensation range. See “Altitude
Compensation” on page 22.
Ramp
*
* Available on both the Patient Menu and the Clinical Menu.
Selects the Ramp time. (Available in standby mode.)
Max Ramp Sets the maximum ramp time the patient can select.
Start CPAP Sets the pressure at the start of the ramp time up to fixed
treatment pressure.
CPAP Sets the fixed treatment pressure.
Calibrate Adjusts the measured pressure at the manometer to
match the set CPAP pressure. Use if there is a differential
of greater than 0.5 cm H
2
O between the set CPAP
pressure and the measured pressure.
Changing the calibration will change the pressure gain
displayed on the LCD.
Entering the Calibrate screen will start airflow. Exiting
this screen will stop airflow.
See “Calibration” on page 24.
Used Hrs
*
Displays the total number of treatment hours. (View
only.)
Usage
*
The number of used sessions greater than 1 minute in
length over the number of days elapsed since the first
used day.
Erase Resets the used hours and used days.
Language* The language in which menus and settings are displayed
on the LCD.
Time Sets the current time.
Date Displays the current date.
SN Displays the serial number of the device.
SW* Displays the current software version.
Motor Hours Displays the total number of hours the S8 Compact
motor has been running, to a maximum of 18,250 hours.
338251r1.book Page 19 Friday, June 10, 2005 5:03 PM