background image

6

  English    7

Technical specifications

Battery technology

Lithium ion

Capacity

< 100 Wh (97 Wh)

UN classification

UN3481 (lithium-ion batteries packed with equipment)

AC power supply

Input range 100–240V, 50–60Hz, 1.0-1.5A

Nominal for aircraft use 110V, 400Hz 

DC converter

Input range 12V / 24V, 13A / 6.5A

Battery output voltage

(24V / 26V) ± 0.5V, 90W continuous

Power supply unit output 

current (rated)

3.75 A 

Battery output current (rated)

3.75 A / 3.46 A

Standby current

< 100 μA

Protection

Overcharge, overdischarge, excess current, short circuit, 

high temperature

Dimensions (L x W x H)

9.1” x 5.0” x 1.0” (230 mm x 126 mm x 26 mm)

Battery weight

2.0 lb (0.9 kg)

System weight

5.1 lb (2.3 kg)

Minimum life cycle

≥ 500 cycles at 73°F (23°C) to 60% capacity

Operating conditions

Charging

Discharging

 

41°F to +104°F (5°C to 40°C); 5–85% maximum humidity

23°F to +104°F (-5°C to 40°C); 5–85% maximum humidity

Transport/storage conditions

-4°F to +113°F (-20°C to +45°C); 5–85% maximum 

humidity

Operating/storage air pressure

600 hPa to 1100 hPa

Aircraft use

Product meets the Federal Aviation Administration (FAA) 

requirements (RTCA/D0-160, section 21, category M) for 

all phases of air travel.

Recharge time

< 4 hrs at full level

Electromagnetic compatibility

Product complies with all applicable electromagnetic 

compatibility requirements (EMC) according to IEC60601-

1-2, for residential, commercial, and light industry 

environments. Information regarding the electromagnetic 

emissions and immunity of these ResMed devices can 

be found on www.resmed.com, on the Products page 

under Service and Support. Click on the PDF file for your 

language.

IEC 60601-1 classification

Class II (double insulation) and/or Internally Powered 

Equipment, IP21 (IP20 while charging), Continuous 

Operation (from mains), Limited Operation (from 

battery), Equipment not suitable for use in the presence 

of a flammable anaesthetic mixture with air or with 

oxygen or nitrous oxide.

Battery run time

> 8 hrs at average device settings

1

  

For more information, see the Battery/Device 

Compatibility List on www.resmed.com. 

Using 15 cm H

2

O (IPAP), 5 cm H

2

O (EPAP), and 15 BPM (Respiratory Rate). Not applicable to devices 

when using heated humidification and heated tubing.

 

Summary of Contents for RPS II














Reviews: