ResMed Astral 100 Clinical Manual Download Page 16

Page: 16 / 189

The Astral system

English

Menu bar

The Menu bar provides access to the four main menus in the Astral device.

Monitors menu

View real-time patient data in either waveform or monitoring formats including pressure, flow, leak, tidal
volume, synchronisation and oximetry.

Setup menu

Configure and view ventilation therapy or device settings; and import/export data.

Alarms menu

Configure and view alarms including alarm volume.

Information summary menu

View therapy statistics, used hours, events, reminder and device information.

Bottom bar

The Bottom bar changes with the function of the device.
It can display buttons to Stop or Start ventilation and Apply or Cancel functions. It can also display
real-time readings.

Main screen

The Main screen displays the monitoring data, ventilation and device controls. Each function is accessed
through the various menus and tabs.

Summary of Contents for Astral 100






























































































































































































Search results

Summary of Contents for Astral 100

Reviews:

Brands by name

Popular brands

ResMed Astral 100, Clinical Manual

Search results

Summary of Contents for Astral 100

Reviews:

Brands by name

Popular brands