Residentia DWI6CS, User Manual

Page: 9 / 28

User Manual \ 09
Tension adjustment of door spring The door springs are set at the factory to the proper tension for the outer door.
Once you have installed your aesthic panel, you will most likely need to adjust
the door spring tension to allow for the additional weight.
— Rotate the adjusting screw to drive the adjustor to tension or relax the steel
cable (refer to the figure below).
— The door spring tension is correct when the door remains horizontal in the
fully opened position, yet rises to a close with slight pressure (i.e. pressure
from a finger).
Connection of the drain hose
Insert the drain hose into a drain pipe with a minimum diarmeter of 40mm,
or connect it onto the trap of your sink where a dishwasher connection is
present.
Important! The top of the hose must be less than 1000mm, as
illustrated below.
\ Installation Instructions \