Residentia DWI6CS, User Manual

Page: 17 / 28

User Manual \ 17
Cutlery basket Cutlery should be placed in the cutlery rack separately from each other in the
appropriate positions, and do make sure the utensils do not nest together.
Starting a wash cycle
— Load the cutlery and dish basket racks.
— Add your detergent and rinse aid if required.
— With the dishwasher door open, press the Power Button and the Power
Indicator light will turn on.
— Press the Program Button and the Wash Program indicator will rotate
between Intensive, Heavy, Normal, Glass, 1 Hour, Rapid.
— Select any additional Options, such as Half Load or Extra Dry if desired.
— Once your desired wash program is selected, close the door and the
dishwasher will start it's cycle.
Note: A cycle that is underway can only be modified if it has
only been running for a short time. To enter standby
mode during a cycle, open the door and hold the Program
button for 3 or more seconds. If the door is opened during
a cycle, the dishwasher will pause momentarily and a
buzzer will sound every minute until you close the door.
Once closed, the dishwasher will begin to operate again
after 10 seconds.
At the completion of a wash cycle Once the dishwasher cycle has finished, the dishwasher willl make an audible
tone for 8 seconds, before stopping.
— Turn off the dishwasher using the Power Button.
— Open the dishwasher door and wait a few minutes before unloading the
dishwasher. This will allow the dishes to climatise and return to a cool state
for handling.
\ Operating Your Dishwasher \