manualshive.com logo in svg

resi-linx digi-MOD RL-DM8000, User Manual

Share
Download
resi-linx digi-MOD RL-DM8000 User Manual Download Page 16

www.resi-linx.com

WARRANTY

Vcomm Pty Ltd states that the warrant that the customer can rely on is that provided 

by the manufacturer. In the event of any warranty claim please contact us and we will 

forward it to the manufacturer. The manufacturer will then determine the extent of their 

liability. This expressly negates, to the extent possible by Australian law, any warranty 

reliance on Vcomm Pty Ltd.

WARRANTY
Vcomm Pty Ltd states that the warrant that the customer can rely on is that 
provided by the manufacturer. In the event of any warranty claim please 
contact us and we will forward it to the manufacturer. The manufacturer will 
then determine the extent of their liability. This expressly negates, to the 
extent possible by Australian law, any warranty reliance on Vcomm Pty Ltd.

www.resi-linx.com

N15275

WARRANTY
Vcomm Pty Ltd states that the warrant that the customer can rely on is that 
provided by the manufacturer. In the event of any warranty claim please 
contact us and we will forward it to the manufacturer. The manufacturer will 
then determine the extent of their liability. This expressly negates, to the 
extent possible by Australian law, any warranty reliance on Vcomm Pty Ltd.

www.resi-linx.com

N15275

Summary of Contents for digi-MOD RL-DM8000

















Reviews:

No comments

Brands by name

Popular brands

Load more brands