6
5
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
STEP 2
STEP 1
Check the package contents before getting started !
First:
Install Hydraulic Pump to Base
Second:Install Foot Bar to the Assembled
Hydraulic Pump & Base
Step 1:Place the assembled Base & Pump on the floor. Use Allen
Wrench to loosen the screws in the crossbar (as shown). Insert Foot
Bar into the holes in the crossbar. (May require to slightly squeeze the
ends of Foot Bar towards each other, and need some maneuvering
for the bar ends to go into place. )
Step 2:Tighten the set screws to firmly hold the Foot Bar in place.
Ｐｕｍｐ
Ｂａｓｅ
１ＰＣ
１ＰＣ
4ＰＣＳ
Locking Nut
Ｆｏｏｔ B
Step 1:Insert the threaded bolts on the pump bottom into the
holes in the base top. Tighten the 4 locking nuts onto the
threaded bolts. (Easier when set on one side, supported by a
sturdy object.)
ａｒ
１ＰＣ
1ＰＣ
Wrench
M4
