Section 4
Installation Checklist
10
Research Instruments Ltd
4
Legs are also available enabling the Embryology Heated Plate to be supported when placed on top
of a stereo zoom microscope light base.
Figure 4-2
Move forwards and
backwards
Can be
flipped
over
Figure 4-3
ii. Positioning of Flush Embryology Heated Plate (6-70-807-A/B)
The Flush Embryology Heated Plate should be mounted in a flow hood tray or other work surface prior
to being installed. Mounting guidelines can be provided by RI upon request as each installation needs
to be considered on an individual basis.
A movable aperture is provided on the underneath of the device which is intended to hide surfaces
beneath the device from view. The movable aperture can be adjusted forwards and backward in order
to centre it with the light source/microscope optics. Alternatively it can be removed completely if it is
not required.