Rescue Solutions International ResQmax, Operation Manual, Page: 8 / 36

Tactical ResQmax Operation Manual Tactical ResQmax Operation Manual
8 29
Note Position
6. Install the O-ring on the face of the Nozzle Plug, pressing it into place inside the groove
around the opening.
7. Lubricate the bore of the Nozzle and the Nozzle Plug with a light film of petroleum jelly.
To reinstall the Nozzle Valve Plug:
1. Orientate the Nozzle Valve Plug so that it is in an open position – with the Face O-ring on the
Nozzle Valve Plug turned at 90 degrees to the normal flow of air through the nozzle.(Figure 23c)
2. Gently insert the Nozzle Valve Plug into the opening, taking care not to cut the o-rings against
the edges of the opening on the Nozzle Body.
3. Rotate the Nozzle Valve Plug slightly from side to side as you insert it to assist the o-rings to
seat properly.
4. Once fully inserted, reinstall the Nozzle Valve Retaining Clip. (Replace the Retaining Clip if it
shows any sign of damage.)
5. Slide the Nozzle Protector over the Nozzle Body – taking care to insure that the aligning
notch on the Nozzle Protector is engaged with the matching shape on the Nozzle Body.
6. Re-install the Pressure Relief Assy.
7. Place the O-Ring around the threaded end of the Nozzle and screw the assembly back into
the projectile cylinder.
Figure 23c -- Reinstalling the Nozzle Valve Plug
Replacement of the Nozzle Pressure Relief Assembly
If the projectile is left exposed to extreme temperatures while charged, the Pressure Relief Assy.
may rupture and need to be replaced.
1. Remove the Pressure Relief Assy by turning counterclockwise using a T-30 Torx driver.
2. Clear the opening and lightly lubricate with Corrosion Block
3. Install a new Pressure Relief Assy.
(See Figure 23a for reference.)
Main Components and Accessories
Launcher
Folding Stock 703
Gauge 507
Handle 501
Trigger 503
Safety 505
Barrel 502
Valve Key 510
Large Line Container 770
Bleed Screw
Compact Line Container 771
Line Containers
Standard lines offered with the Tactical ResQmax use the Compact Line Container (fig 2). The
Large Line Container (fig 1) is available for special applications and the ascending ladders.
Folding Stock
The Tactical ResQmax has been designed to be used with a folding stock. This will enhance the
operator’s ability to aim the projectile more accurately. (fig. 2 – above) When in the folded
position the stock becomes a convenient carrying handle. (fig. 1 above)
Figure 1. Launcher, right side view
Figure 2. Launcher, left side view