Rescue Solutions International ResQmax Operation Manual Download Page 2

Tactical ResQmax Operation Manual

Tactical ResQmax Operation Manual

2

Service

Any service or maintenance other than items described in this manual must be performed by a technician
certified by the Manufacturer to perform such work. It is the purchaser’s responsibility to register the product
with the Manufacturer. Failure to complete warranty registration will void the warranty. For your convenience
a Service & Maintenance Record is provided on page 38 of this manual. It is the purchaser’s responsibility to
enter  the  date  of  purchase  on  the  Service  &  Maintenance  Record,  and  to  insure  that  servicing  is  done  in
accordance with the Manufacturer’s recommendations. Rescue Solutions International, Inc. offers FREE technical
support. Call 800.709.5018 or 760.727.8998 or email [email protected].

© 2002 Rescue Solutions International, Inc.
1210-B Keystone Way
Vista, CA 92081 USA
760.727.8998        760.727.8688 fax
http://www.resqmax.com

Warnings

This equipment is intended to be used by professionals trained in the use of this equipment. Misuse of
this equipment may cause  bodily injury or death.  Manufacturer disclaims all liability resulting from the
use of this equipment in any manner other than that prescribed by the manufacturer.

The Tactical ResQmax is extremely powerful and propels a projectile at high speed. It is NOT a firearm,
but the same precautions should be used. If misused, this equipment could cause serious bodily injury or
death. Handle all components with the appropriate care.

DO  NOT  deploy  the Tactical  ResQmax  directly  at  any  person  or  property.   When  testing  or  training
with the Tactical ResQmax, make sure that no persons or property are in the vicinity of the target.

The Tactical ResQmax requires proper training and servicing. If you are not familiar with this equipment
or unwilling to follow the recommendations as outlined in this Operation Manual, then you should not
operate  this  equipment. The  user  must  follow  recommended  servicing  and  maintenance  guidelines  to
ensure the long-term integrity and safety of the Tactical ResQmax.

Some optional grappling hooks offered are for use to establish a line only – or for recover of mooring
lines  -  and  should  not  be  used  for  the  support  of  a  human  being.  Only  grappling  hooks  certified  for
climbing by the manufacturer should be used for the support of a human being.

Loads imposed on grappling hooks should never exceed the design loads. Any grappling hooks must be
removed from service if any signs of damage or deformity are visible.

It is the responsibility of the purchaser of any grappling hooks to establish a program which provides for
regular  examination  of  each  grappling  hook  for  deformation  or  invisible  fractures  using  a  magnetic
particle test or other similar test. Any grappling hook which shows hidden fractures as a result of such
a test should be immediately removed from service. The frequency of this examination is at the discretion
of the purchaser, and should be based upon the use of the grappling hook. It is the purchaser’s responsibility
to  insure  that  all  grappling  hooks  are  maintained  in  a  manner  which  makes  them  suitable  for  their
intended use.

If you are uncertain about the proper usage, care, maintenance or any other aspect of this equipment,
call  Rescue  Solutions  International,  Inc.  directly  at  800.709.5018  or  760.727.8998  or  by  email  at
[email protected].

Note:

See Disclaimer, page
35, for an Important
Note.

35

Rescue Solutions International Inc. warrants to the original owner, that if used, maintained and
stored  according  to  the  manufacturer’s  recommendations,  that  the Tactical  ResQmax  is  free
from defects in material and workmanship for twelve (12) months from the date of the sale.

THIS WARRANTY IS LIMITED TO THE REPAIR AND REPLACEMENT OF PARTS AS NECESSARY,
AND ANY NECESSARY LABOR AND SERVICES REQUIRED TO REPAIR OR REPLACE ANY
PARTS TO RENDER THE DEVICE FREE OF DEFECTS.  THE SOLE OBLIGATION OF RESCUE
SOLUTIONS INTERNATIONAL, INC. SHALL BE  THE REPAIR OR REPLACEMENT OF THE
Tactical  ResQmax AND  UNDER  NO  CIRCUMSTANCES  SHALL  RESCUE  SOLUTIONS
INTERNATIONAL,  INC.,  ITS AGENTS,  SUCCESSORS,  OR ASSIGNS,  BE  LIABLE  FOR ANY
DIRECT,  CONSEQUENTIAL,  OR  OTHER  DAMAGES ARISING  OUT  OF ANY  CLAIMED
DEFECT IN THE DEVICE OR THE METHOD OF ITS USE. THIS WARRANTY IS IN LIEU OF
ALL  OTHER WARRANTIES,  EXPRESS  OR  IMPLIED, WHETHER  RELATING TO  FITNESS,
MERCHANTABILITY, OR OTHERWISE.

Except  as  to  the  express  warranty  set  forth  above,  the  manufacturer  disclaims  any  and  all
warranties and representations relating to the product. This limited warranty shall be governed
by the laws of the State of California.

If you have a problem with your Tactical ResQmax, call 760-727-8998 within 90 days of discovery
of the problem. You will be given instructions on where to send your Tactical ResQmax for repair
or replacement. If the problem is covered by this warranty, Rescue Solutions International, Inc.
will repair or replace your Tactical ResQmax, or otherwise notify you, within 30 days of receipt
of  the Tactical  ResQmax. Any  actions  for  breach  of  warranty  or  breach  of  contract  must  be
commenced within one year from the date of discovery of the breach.

Limited Warranty

Disclaimer

Rescue Solutions International, Inc. (RSI) has developed the Tactial ResQmax and all accessories in
response to strong demand expressed by military, police and special forces teams worldwide. This
product was created to fill an existing need as indicated by personnel and organizations whose
members and employees knowingly and consciously are routinely engaged in very high risk and
often life-threatening activities in the ordinary course of the performance of their duties.

RSI manufactures this equipment for use by, and at the discretion of, professionals aware of the
risks associated with the use of this type of equipment, and who are properly trained in its use.
This manual is intended only to educate the user in various aspects of this specific equipment.
This manual does not undertake to teach, train, encourage or condone any activities that may be
associated with the use of this equipment. No equipment, brochure, manual or other materials
produced by RSI, nor the offer for sale or the sale itself of this equipment, is intended to induce
any individual or organization to put personnel at personal risk.

Rescue Solutions International, Inc. has no control over the training in the use of this equipment,
the maintenance and servicing of this equipment, or the conditions under which this equipment
is used. Rescue Solutions International, Inc. disclaims any and all responsibility for any liability
arising out of the use of this equipment, however caused.

Summary of Contents for ResQmax





































Reviews: