background image

2.Original parameters / TROPICAL parameters / DESERT parameters and description:

 •  Day and night temperature and temperature control modes are set and controlled separately

.

 

  

When

 

the

 

temperature

 exceed 

the

 

measurement

 

upper

 limit, 

the

 LCD will 

display

 HH and make an alarm 

    sound.

 

• 

 

When

 

the

 

temperature

 exceed 

the

 

measurement

 lower limit, 

the

 LCD will 

display

 LL and make an alarm 

    sound.  
 •

    LCD area, and the power output will be automatically cut o

f

f with an alarm sound.

 •  In the setting state, the device will automatically save the parameters and return to the working state if 

    no button is pressed within 30 seconds.
 • 

 

The starting point for daytime must be lower than that for night.

 

• 

 

When

 

the

 set timing time of two or more adjacent points is 

the

 same, 

the

 

system

 

only

 

executes

 

the

 setting 

    time of the next point.

 

•  When setting the value, long press “▲” or “▼” button to increase or decrease the number quickly

.

 •  With overload protection function.
 •  With power failure memory function.
 •  The sensor detection frequency is once per every 5 seconds.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Day on

Night on

Day temperature on

Day temperature o

ff

Night temperature on

Night temperature o

ff

T Timer 1 ON

T Timer 1 OFF

T Timer 2 ON

T Timer 2 OFF

T T

imer 3 ON

T T

imer 3 OFF

T Timer 4 ON

T Timer 4 OFF

Starting time of day

Starting time of night

Power-on day temperature

Power-of

f day temperature

Power-on night temperature

Power-of

f night temperature

T

imer 1 turn-on time

T

imer 1 turn-o

ff time

T

imer 2 turn-on time

T

imer 2 turn-o

ff time

T

imer 3 turn-on time

T

imer 3 turn-o

ff time

T

imer 4 turn-on time

T

imer 4 turn-o

ff time

8:00

18:00

86°F

91°F

73°F

77°F

08:00:00

18:00:00

23:59:59

23:59:59

23:59:59

23:59:59

23:59:59

23:59:59

8:00

18:00

82°F

86°F

75°F

79°F

08:00:00

18:00:00

23:59:59

23:59:59

23:59:59

23:59:59

23:59:59

23:59:59

8:00

18:00

86°F

91°F

73°F

77°F

08:00:00

18:00:00

23:59:59

23:59:59

23:59:59

23:59:59

23:59:59

23:59:59

No.

Mode

Function Description

Default 

V

alue

TROPICAL Original 

Set V

alue

DESERT Original 

Set V

alue

4

Summary of Contents for THC16













Reviews: