24 Port Fast Ethernet Web Management Switch User Manual
4.4.2.
RST Port
Figure 4-16
Enter priority and RPC for each port
¾
Priority: it indicates the priority of designated port. The priority can be used to determine
the port to choose when there are two ports connect in the same LAN
¾
RPC: the number that RPC can select is from 1 to 200000000. The smaller the number is,
the more possible the corresponding port be selected to transmit data packets. 0 is auto
¾
Status: shows the current STP status of each port.
Disable: indicates port link is disconnect
Blocking: port is blocked, can’t transmit or learn MAC address
Listening: port is in listening mode, can’t transmit and learn MAC address
Learning: port is in learning mode, can’t transmit but can learn new MAC address
Forwarding: port is in transmitting mode, can transmit and learn new MAC address
¾
Designated bridge: indicates MAC address and priority of designated bridge
¾
Designated port: indicates MAC address and priority of selected port from designated
bridge
Note
: if you want to use this function, you only need to select RSTP mode. The switch will
transmit BPDU and figure with other switches automatically, there is no need to configure
generally
4.4.3.
Link aggregation
The Link Aggregation Configuration is used to configure the settings of Link Aggregation. You
can bundle more than one port to be a single logical port, thus the logical port aggregates the
bandwidth of these ports. This means you can apply your current Ethernet equipments to build
32
